RF340-4PR-TO Remote Control Reverse Polarity 4 Motor 12 VDC Control with Timeout
Part Number: RF340-4PR-TO
Versatile four motor 12VDC Polarity Reversing R.F. Remote Control transmitter & receiver are designed for bi-directional control of up to four DC motors. The output relays are rated at 30A @12VDC.
This system is ideal for controlling lifts, jacks, winches, slide-outs, awnings and agricultural applications where 12 VDC polarity reversing DC motors are used.
The receiver electronics are encapsulated for waterproofing and it is suitable for use in harsh environments. The input has reverse polarity protection. Operating temperature range - 0° F to 160° F. Receiver dimensions are approximately 5" L x 5" W x 2" H.
Transmit range is greater than 100 feet under normal operating conditions. FCC Approved.
Extra transmitters are sold separately under part number RFT340-4PR-TO.
The transmitter has two buttons assigned to each of the four outputs. The up (^) button runs the motor in one direction and down (v) button runs the motor in the opposite direction. There are two all buttons which apply 12 VDC to all outputs to run the four motors simultaneously. The outputs are energized for as long as the buttons are depressed.
There is a two minute timeout feature incorporated into the receiver. To turn the receiver On, first press and release the A button on the transmitter. Within two seconds, press and release the B button on the transmitter. The receiver will now respond to transmitter commands and automatically turn off after two minutes of no activity.
- 12 VDC Input
- Reverse Polarity Protection
- Output Relays rated at 30A@12VDC
- Transmitter uses a type A23 12 volt battery
- Range is greater than 100 feet under normal operating conditions.