LRF340-80PR Long Range 80 Amp RF Remote Control Reverse Polarity 12VDC Motor Control
Part Number: LRF340-80PR
Long Range, Heavy Duty Polarity Reversing R.F. Remote Control transmitter & receiver are designed for bi-directional control of DC motors. The output relays are rated at 80A @12VDC.
This system is ideal for controlling lifts, jacks, winches, and agricultural applications where 12 VDC polarity reversing DC motors are used. The keyfob transmitter has two buttons . The left button runs the motor in one direction and right button runs the motor in the opposite direction.
The control can be configured for either momentary or latching operation. In the momentary mode, the motor will operate as long as the buttons are held down. In the latching mode, pressing either button will start the motor and pressing the button a second time will stop the motor. The auxiliary switch leads only provide momentary operation.
The receiver electronics are encapsulated for waterproofing and it is suitable for use in harsh environments. Operating temperature range - 0° F to 160° F. The robust ABS enclosure dimensions are approximately 3" L x 3" W x 1.5" H. The long range antenna is housed in a separate housing and connects to the receiver with an 8 foot cable. The receiver has two mounting tabs.
There are four 3/8" terminals for the connections. The mating quick connect terminals are supplied with the unit.
Transmit range is greater than 500 feet under normal operating conditions and can go as far as 900 feet under ideal conditions. FCC Approved. Proudly made in the U.S.A.
- Frequency: 340 MHz.
- Input voltage: 12VDC with reverse polarity protection.
- The output relays are rated at 80A @12VDC.
- Operating temperature range: 0° F to 160° F.
- Receiver dimensions are approximately 3" L x 3" W x 1.5" H.
- Transmit range is greater than 500 feet under normal operating conditions and can go to 900 feet under ideal conditions.
- Up to 12 keyfob transmitters can be used with each receiver
Accessories for this item